Olympus SP-800UZ - Manual (Page 22)

22 EN
In s modes, the optimum shooting
settings are pre-programmed for specifi c
shooting scenes. For this reason, settings
may not be changed in some modes.
Option Application
B PORTRAIT/F LANDSCAPE/
G NIGHT SCENE *1 /
M NIGHT+PORTRAIT *1 /
C SPORT/N INDOOR/
W CANDLE *1 /
R SELF PORTRAIT/
S SUNSET *1 /X FIREWORKS *1 /
b MULTI FIREWORKS/
0 MULTIPLE EXPOSURE/
V CUISINE/d DOCUMENTS/
q BEACH & SNOW/
z BIRD WATCHING/
1 SOFT BACKGROUND SHOT/
 PET
The camera
takes a picture
using the
optimum settings
for the scene
conditions.
*1 When the subject is dark, noise reduction is
automatically activated. This approximately doubles
the shooting time during which no other pictures can
be taken.
Making an overlay image with
fi reworks
([b MULTI FIREWORKS] mode)
1 Use HI to select [b MULTI
FIREWORKS], and press the A button to
set.
2 Press the shutter button to take the fi rst
frame.
The exposure is locked at the fi rst frame. The
saved image is displayed as the background.
To retake the fi rst shot, press the A button,
and then press the shutter button again.
3 Adjust the position of the fi reworks that
will be taken in the second frame over the
fi rst frame used as the background, and
then press the shutter button.
The overlay image is saved as a separate
image from the fi rst and second frames.
To retake the second shot, press the shutter
button again.
●
●
Making an overlay image
([
0 MULTIPLE EXPOSURE] mode)
The method of shooting is the same as
in [b MULTI FIREWORKS] mode. While
shooting settings cannot be changed in [b
MULTI FIREWORKS], it is possible to do so
in [
0 MULTIPLE EXPOSURE].
Taking pictures with blurred
backgrounds ([
1 SOFT
BACKGROUND SHOT] mode)
1 Use FG to select [ 1 SOFT
BACKGROUND SHOT], and press the A
button to set.
2 Use HI to select a frame (6 different
types are available/AUTO), and then
press the
A button.
AUTO recognizes the subject (people,
fl owers, etc) automatically and blurs the
background for shooting.
3 Shoot the subject within the frame.
The frame can be moved by pressing
FGHI .
To take pictures of a moving subject
like a pet ([
 PET] mode)
1 Use HI to select [  PET], and press
the A button to set.
2 Hold the camera to align the AF target
mark on the subject and press the A
button.
When the camera recognizes the subject,
the AF target mark automatically tracks the
subject movement to focus on it continuously.
“To focus on a moving subject continuously
(AF Tracking)” (p. 31).
●
●
●