Optimus Micro-40 - Manual (Page 9)

9
Cautions:
You must use a power source
that supplies 3 volts DC and
delivers at least 300 mA. Its
center tip must be set to positive and its
plug must fit the Micro-40's DC 3V jack.
The recommended adapter meets these
specifications. Using an adapter that
does not meet these specifications could
damage the Micro-40 or the adapter.
• Always plug the DC adapter into the
Micro-40 before you plug it into the ciga-
rette-lighter socket, and unplug the
adapter from the cigarette-lighter socket
before you unplug it from the Micro-40.
Follow these steps to power the Micro-40
from your vehicle's battery.
1. Set the DC adapter's voltage switch to
3V.
2. Insert the 3.4 mm outer diameter/1.3 mm
inner diameter barrel plug into the
adapter's cord so it reads TIP+.
!
M IC
D C 3 V
14-1168.fm Page 9 Thursday, January 20, 2000 2:05 PM