Preparation, Read this before operating, Connections – Optimus - Katadyn Products Inc. Dual Cassette Dubbing Deck SCT-540 User Manual
Page 5: Line output jacks, Line input jacks, Ac power cord
5
PREPARATION
READ THIS BEFORE OPERATING
• Choose the installation location of your cassette deck
carefully. Avoid placing it in direct sunlight or close to
a source of heat. Also avoid locations subject to
vibrations and excessive dust, heat, cold or moisture.
• Do not open the cabinet as this might result in dam-
age to the circuitry or electrical shock. If a foreign
object should get into the set, contact your dealer.
• When removing the power plug from the wall outlet,
always pull directly on the plug, never yank the cord.
• Do not attempt to clean the unit with chemical sol-
vents as this might damage the finish. Use a clean,
dry cloth.
• Keep this manual in a safe place for future reference.
CONNECTIONS
Connect your cassette deck to your receiver or amplifier
using the supplied audio cables.
Line Output Jacks
Using one of the audio cables, connect the cassette
deck’s
L
and
R
LINE
OUT
jacks to the receiver or amplifi-
er’s left and right tape input jacks.
Line Input Jacks
Using the other audio cable, connect the cassette deck’s
LINE
IN
jacks to the receiver or amplifier’s tape output
jack.
Note: If you are not sure which receiver/amplifier jacks to
use, refer to your receiver or amplifier’s owner’s manual.
AC Power Cord
Plug the AC power cord into an AC wall socket.
R
L
IN
OUT
LINE
Amplifier
Cassette Deck
To AC Outlet
14-678.fm Page 5 Wednesday, June 2, 1999 9:29 AM