Output Solutions 650 - Manual (Page 141)

Appendix B IBM ProPrinter X24 and IBM ProPrinter II Commands
B.2.9 Other Functions
• CAN : Clear print buffer
• DC1 : Activate printer-system connection
• DC3 : Deactivate printer-system connection
• ESC 5 n : Automatic line feed after CR
• ESC 6 : Table 2 of character set
• ESC 7 : Table 1 of character set
• ESC \ n1 n2 : Print characters from table 3
• ESC ^ : Print a character from table 3
• ESC BEL E : Change emulation
• ESC Q ETX : Deactivate printer-system connection
CAN
Clear Buffer Hexadecimal code: 18
Clears the contents of the print buffer; all the data is lost.
The current printing position remains unchanged.
DC1
Activate Printer-System Connection Hexadecimal code: 11
Sets the printer "on-line" until a DC3 is received.
DC3
Deactivate Printer-System Connection Hexadecimal code: 13
The printer sends this command via the serial interface to indicate that the buffer is full.
With a parallel interface, it is considered a NUL.
ESC 5 n
Automatic Line Feed after CR Hexadecimal code: 1B 35 n
Sets/cancels the execution of an automatic line feed when a CR is received. It takes
priority over the setting made in the SETUP.
n = 1 (1 or 49)D: automatic LF after CR (CR=CR+LF).
n = 0 (0 or 48)D: no automatic LF after CR (CR=CR).
B-31