Oki 520 - Manual (Page 47)

E-40 Section 5
Paper Specifications
Paper Type Feed Weight Width Range*
Cut sheets Top only 14 to 24 lb. NM: 7.2 to 8.5”
WM: 7.2 to 14.3”
Single-part Rear, Bottom 12 to 24 lb. NM: 3 to 10”
continuous forms WM: 3 to 16”
Carbonless, Rear, Bottom 9 to 11 lb. NM: 3 to 10”
continuous forms WM: 3 to 16”
(orig. + 5 copies)
Interleaf, Rear, Bottom 10 to 12-lb. NM: 3 to 10”
continuous forms paper, 9-lb. WM: 3 to 16”
(orig + 5 copies) carbon
Labels Bottom only N.A. NM: 3 to 10”
WM: 3 to 16”
Envelopes, Top only 24 lb. max 6.5 to 9.5”
single feed
Envelopes, Bottom only 24 lb. max 6.5 to 9.5”
continuous feed,
non-overlap type
Card stock Bottom only 120 lb. max. N.A.
Transparencies Top only — 8.5 to 11”
* NM = Model 520; WM = Model 521
Bar Codes: Code 39, UPC A, UPC E, EAN 8, EAN 13,
Interleaved 2 of 5, Code 128 (A, B, C),
Postnet
Receive Buffer Size: 64K
Reliability
Parameter Reliability
Mean Time Between 6000 hours at 25% duty
Failures (MTBF) cycle and 35% page density
Mean Time to Repair 15 minutes
(MTTR)
Printhead life 200 million characters average
in 10 cpi utility mode at 25%
duty and 35% page density
Ribbon Life (on 4 million characters
average, 10 cpi utility)
Paper Width: Minimum: 3”
Maximum: Model 520, 10”
Model 521, 16”
Paper Weight: 12 to 24 lb.
Paper Thickness: Rear feed: 0.014” (0.36 mm)
Bottom feed: 0.017” (0.44 mm)