Sylvania DVC840G - Manual (Page 11)

VCR
Functions
EN – 11 –
1 Press [SEARCH MODE] once.
2 To select Index Mark
3
4 After searching, it automatically
starts playback.
1 Press [SEARCH MODE] twice.
2 Select the desired length of time for fast forwarding or
rewinding.
3
4 After searching, it automatically starts playback.
POWER
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
REC/OTR
MENU
SETUP TOP MENU
MODE ZOOM
SUBTITLE T-SET ANGLE
ENTER
RETURN
SEARCH MODE
REPEAT A-B
OPEN/CLOSE
/EJECT SPEED AUDIO
CLEAR/ C. RESET
1 2 3
4 5 6
7 8 9
0 +10
1
Insert a video cas-
sette into this unit.
2
To start playback
3
To stop playback
4
To eject the cassette
Hint
• When a tape with-
out record tab is
inserted, the unit
will start playback
automatically.
• Tracking will be
automatically
adjusted upon play-
back. To adjust the
tracking manually,
press [SKIP/CH.
G /K, H/L] (or
[CHANNEL K/L]).
Playback
Before:
Turn on the TV and set it to channel .
• If channel  has been already occupied for broadcasting, see “RF Output Channel” section on page 6.
PLAY
STOP
PLAY
STOP
OPEN/CLOSE
/EJECT
Other Operations
Hint
• Still/Slow mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head.
• To return to playback from the Picture Search/Still/Slow mode, press
[PLAY B].
VCR Functions
2
You can skip the program backward and forward by the
Index Mark.
Index Search
SEARCH
MODE
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
Beginning
of the tape
End of
the tape
CURRENT PROGRAM
INDEX MARK
PLAYB
Hint
• The Index Mark will be made automatically at the beginning of each recording.
• The time gap between Index Marks should be greater then 1 minute for SP
mode, 2 minutes for LP mode and  minutes for SLP mode.
To rewind
To fast forward
Hint for Index Search & Time Search
• These functions are not available during recording.
• Press
[STOP C] to stop the search.
• If a tape ends during a search, your search will be cancelled and the tape will
rewind to the beginning.
Time Search
You can search backward and forward a specific
length of time on a tape.
INDEX SEARCH
– –
ss
BB
or
SEARCH
MODE TIME SEARCH
– : – –
PLAYB
or
(1 minute~9 hours and 59 minutes)
To rewind
To fast forward
ss
BB
To cue or review picture during playback (Picture Search)
Use [g] or [h ]([ F.FWD g] or [REW h]).
• Press it again and the unit will search in super high speed.
(in the SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
• If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [SKIP/CH. G/K, H/L] (or
[CHANNEL K/L]).
• If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV if equipped.
Counter Reset
Press [CLEAR/C.RESET].
To play back in slow motion (Slow mode)
Press [SLOW] during playback or the still mode.
• If the noise bars appear on the TV screen, you can reduce it
by using [ SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).
Auto Rewind
When a tape reaches its end during playback, fast-forward
or recording (except Timer Recording and One Touch
Recording), the tape will automatically rewind to the beginning.
After rewinding finishes, the unit will eject the tape.
VCR
VCR
• Insert a tape into this unit.
VCR
• Insert a tape into this unit.
INDEX SEARCH
0 
01 ~ 20
TIME SEARCH
2 : 5 0
0:01~ 9:59
3
4
CHANNEL STOP
REV FWD
SKIP H G SKIP
OUTPUT
DVD PROGRESSIVE SCAN
OPEN/CLOSE
PLAY STOP/EJECT PLAY REC/OTR
VCR POWER
F.FWD REW VIDEO AUDIO /
3
4
2
1
DVC840G_E8A02UD.indd 11 2006/01/12 1:07:59