Oricom BB200 User Manual

Page 8

Advertising
background image

- 8 -

PRE-DAILLING

Pre-dial allows you to enter a telephone number and verify it on the screen before you
place the call. The screen displays the last 12 digits dialled but you can enter up to 2
digits.

•

In standby mode enter the phone number you wish to dial.

•

To enter a pause, press the

button and a dash “-“will appear in the display.

•

If you make a mistake, press DEL to erase one digit at a time. Or you can press

and hold the DEL button to clear the entire number and return the phone to standby.

•

Press to dial out the number.

•

To end the call, press the button again, or replace the handset back in the base.


Note: If you have connected this phone to an office phone system (PBX) you may need

to enter a pause for a few seconds between dialling the line access code and the
actual phone number.

To pause, press the

button and a dash “ - “will appear in the display.


LAST NUMBER REDIAL

You can review and call back the last 3 numbers you have dialled as your cordless
stores them in the redial memory.

•

In the standby mode press the

button to scroll through the last 3 numbers you

dialled.

•

Select the number you want to redial and press , to dial the number.


CALL DURATION TIIMER

When you make or answer a call the display shows the call duration in time minutes
and seconds.

ADJUSTING THE EARPIECE VOLUME

During a call, to adjust the volume in the handset’s earpiece or speakerphone press
the volume button repeatedly

.

The display shows the current volume level: the more “0’s” the highest the volume (“0”
to “00000”).

TO PAGE THE HANDSET

This function is useful if you can’t find your handset.

•

On the base unit press and release the

button. The handset rings with a special

tone.

•

To stop the handset ringing, on the handset press any button or numbered key.


Advertising