Playback, Fm mode, Normal playback – Sylvania SSC132 User Manual

Page 17

Advertising
background image

- 17 -

EN

9I03

PLAYBACK

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in
gently, but continuously, on the center-back of the
cassette until it is drawn into the TV/VCR. The
TV/VCR will automatically turn on.

CORRECT

Window

WRONG

This TV/VCR will operate with any cassette that has the

mark. For best results, we

recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

PRECAUTIONS

•

Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a
warm place or visa versa. Before using a tape with
these conditions, to avoid damage of the tape and
your TV/VCR, wait until the tape has warmed to
room temperature and the moisture has evaporated.

•

Avoid extreme heat, high humidity and magnetic
fields.

•

Do not tamper with the cassette mechanism.

•

Do not touch the tape with your fingers.

FM MODE

This function enables you to receive FM radio broad-
casting.

1

Set the FM mode

Press the TV/FM button on the
remote control. The radio frequency
appears on the TV screen.

2

Select the radio frequency you want to receive

Press the CHANNEL K or L button until your
desired radio frequency appears.

FM 88.0 MHz

NOTES:

•

FM mode is not available for model SRC22194.

•

The radio frequency indication repeats to appear
and disappear.

•

You can not record the FM radio wave broadcast-
ing.

•

If you receive a weak radio signal, you may change
the FM Antenna mode to INT(internal) or
EXT(external) by following the step below.

1)Press the MENU button. Press the PLAY/K or

STOP/L button to point to “CHANNEL SET UP”.
Then, press the F.FWD/B button.

2)Press the PLAY/K or STOP/L button to point to

“FM ANTENNA”. Select [INT] or [EXT] using
the F.FWD/B or REW/s button.

NORMAL PLAYBACK

Make sure ...

•

TV/VCR power must be turned on.

1

Insert a prerecorded tape

If the erase-protection tab has been removed, the
TV/VCR will start playback automatically.

2

To begin playback

Press the PLAY button.
Note: If any menu is activated on
the screen, the PLAY button does
not function. Press the MENU but-
ton to clear the menu, then press the
PLAY button.

3

To stop playback

Press the STOP button when playback is completed.

PLAY B

Advertising
This manual is related to the following products: