Oricom EZY100 - Manual (Page 65)

65
Settings
Flashing keypad
Use this menu to select whether the keypad back
lighting should fl ash in the event of incoming calls.
1. During standby mode, press M1 to enter the main
menu.
2. Use
i/j to select Phone Setting, press M1 to
confi rm.
3. Use
i/j to select Call Setting, press M1 to confi rm.
4. Use
i/j to select Key LED fl ash, press M1 to
confi rm.
5. Use
i/j to select On or Off, press M1 to confi rm.
Navigation buttons
You can assign various menu options to the digit keys
2 to 9. Then hold the corresponding key pressed longer
than 3 seconds to open the respective menu.
1. During standby mode, press M1 to enter the main
menu.
2. Use
i/j to select Phone Setting, press M1 to
confi rm.
3. Use
i/j to select Set Fast key 2−9, press M1 to
confi rm.
4. Use
i/j to select 4−key, press M1 to confi rm.