Olevia LT26HVE Series - Manual (Page 21)

19
TV Installation and Connection Guide
Connecting to a Satellite Receiver or Cable Box With Component
Connectors
Use this hookup if your Satellite Receiver or Cable Box has component
(Y, Pb, Pr) jacks.
1.Using a component video cable, connect the Satellite Receiver or
Cable Boxes' Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.
Colors on Component Video connectors:
Y: Green
Pb (also identified as Cb, CB or B-Y): Blue
Pr (also identified as Cr, CR or R-Y): Red
Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are
sometimes labelled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the
cables to the matching colors.
2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes'
Audio OUT jacks to the TV's Audio in jacks.
Note:
Note: The YPbPr connection provides the best quality of video signal
compared to AV (composite) and S-Video connection.
Use this method of connection if your Satellite Receiver or Cable
Box has component (Y, Pb, Pr) jacks.
Disconnect all power sources before making any connections.
Component cable with RCA connector
L
L
R
R
S-VIDEO
S-VIDEO
VIDEO
VIDEO
EarPhone L R
ANT Y
Y
Pb / Cb
Pb / Cb
Pr / Cr
Pr / Cr
L
L
R
R
Component2
VIDEO-1
VIDEO-2
Audio Output Component1
Rear of TV
Audio cable
Satellite Receiver or Cable Box