5840_multiportrouter_may07_final 3, A sophisticated product architecture – Quick Eagle Networks 5840 User Manual

Page 2

Advertising
background image

The 5840 Multiport Router provides the following features:

•

Support for a wide variety of WAN protocols such as PPP, Frame Relay, Multilink PPP,
Multilink Frame Relay FRF.16.1, and MAC Learning Bridging for point-to-point and point-
to-multipoint applications to the Internet, private or public Frame Relay networks

•

Advanced IP / Frame Relay Router capabilities with:

• Standard-based IP-over-Frame Relay encapsulation, RFC-2427 compliant

• Link Management Interface (LMI): ANSI AnnexD, ITU Annex A, and FRF Rev 1.0

• Static and dynamic configuration of up to 1024 DLCIs

• Static and dynamic mapping of DLCI to IP Subnets using InverseARP

•

Dynamic routing protocols RIP1, RIP2, OSPF or optional BGP-4 (I-BGP and E-BGP)

•

Dynamic load balancing, using OSPF or optional BGP-4 (I-BGP and E-BGP)

•

Optional DiffServ-compliant QoS capabilities:

• Ability to assign maximum bandwidth to each traffic class

• Traffic metering, shapes or drops “out-of-profile” traffic

• Prevents lower classes of traffic from being bandwidth starved

• Enables QoS per routing interface in incoming and outgoing direction

• Novice user configuration with presets; advanced user to optimize resources and

throughput; statistics reports on QoS

•

Network Address Translation (NAT) and port translation (NAPT)

•

Remote configuration and management through Telnet (Terminal User Interface menus),
Command Line Interface (CLI), and SNMPv3

•

MAC Bridging features: VLAN MPLS tag transparency

•

Basic device configuration and T1/E1 loopback diagnostics through front panel

•

Full range of network performance monitoring and troubleshooting features that enable
you to accurately measure end-to-end performance of the network, including RMON-1
statistics, RMON-2 applications and protocol monitoring, and Frame Relay SLA FRF.13.

•

Multilink Frame Relay (FRF.16.1) and MLPPP (RFC1990) support

•

Stateful Inspection Firewall with TCP, UDP, ICMP, DNS, SMTP, FTP, and HTTP protocol
handling capabilities

•

Menu access for layer-3 and above statistics

•

Multiple multilink bundles and support of MLPPP / MLFR bundle classes A, B & C

•

Support of DHCP server and DHCP relay agent

A sophisticated product architecture.

Advertising