QSC Audio POWERLIGHT PL380 - Manual (Page 10)

10
AC Mains Current Draw
This table provides typical current draw for each model as a function of load and output power level. Units of measurement are amperes rms.
NOTE! Current draw shown is for 120 VAC line. For 230 VAC models, multiply values shown by 0.5.
•1/8 power (pink noise) represents typical program with occasional clipping. Use this rating for most applications.
•1/3 power (pink noise) represents severe program with heavy clipping.
•Full power (sine) is continuous sine wave driven at 1% clipping.
* Burst mode only. Protective limiting will reduce long-term AC current
Model Load
Idle
Current
(Amperes)
1/8 Power
Pink
Noise
BTU
1/3 Power
Pink
Noise
BTU
Full Power
Sine
Wave
BTU
PL325 8 ohms x 2
4 ohms x 2
2 ohms x 2 1.0 5.2 A
8.5 A
12.6 A
792
1387
2178
8.6 A
14.3 A
22.0 A
893
1981
3339
17.0 A
28.3 A
45.3 A 1204
2481
4942
PL340 8 ohms x 2
4 ohms x 2
2 ohms x 2 1.0 7.5 A
11.8 A
19.1 A
1150
2114
3495 13.3 A
21.1 A
31.6* A
1682
2864
5306*
25.9 A
43.5* A
68.6* A
2082
4253*
8601*
PL380 8 ohms x 2
4 ohms x 2
2 ohms x 2 2.8 8.7 A
13.1 A
19.3 A
918
1355
1768
16.0 A
26.2 A
41.6* A
1101
1674
3278*
38.3 A
70* A
100* A
1853
3000*
6000*
Rack Mounting and Dimensions
Use four screws and washers to mount the amplifier to the equipment rack rails. To use the amplifier outside a rack, attach the self-adhesive rubber
feet to the bottom.
For portable, mobile, or other applications where the rack assembly may be moved, we strongly recommend supporting the rear of the amplifier. A
rear rack ear kit is available from QSC’s Technical Services Group.
Optional rack handles provide finger grips at each end, making lifting and setting into the rack more comfortable.
15.63” (39.7 cm)
17.30” (44.0 cm)
3.50” (8.9 cm)