Quantum QC 310 - Manual (Page 7)

The toasty warmth, brawny punch and
intuitive handling of a classic all-tube
tone machine, wed to the flexibility and
precision of a premium studio device:
This combination of qualities makes the
QT 600 the first choice for bassists who
refuse to settle for anything less than the
best.
The amp’s mighty heart is a powerhouse
600 watts Dynavalve™ amp. Pumping
out ample power for persuasive perform-
ance in every sonic scenario, it offers
plenty of headroom to stress even the
most fulminate musical accents. The
Tube Growl
knob affords total control
over typical tube-driven compression and
saturation, and an impedance selector
matches output power to suit connected
cabinets.
The two passive and active inputs are
extremely responsive across the full
QT 600
sweep of the gain spectrum, providing
the perfect platform for launching even
the most propulsive grooves. Powered
by sophisticated parallel EQ technology,
the four-way voicing section spares the
rod to “spoil” the signal, gently tweaking
frequencies for the most effective and
musical sound-sculpting imaginable. Four
pushbutton filters shape the basic tonal
character: Punch emphasizes the low and
high ends without altering level. Bass
Shape attenuates the bottom end, say, to
suppress undesirable stage rumble. Mid
Boost pumps up the mids for muscular
metal tone. HF Character underscores the
shimmering overtones at the top of the
frequency spectrum.
The QT 600’s DI Out balanced is variable,
sending either the instrument’s (PRE)
or the amp’s signal (POST) to the mixing
console.
• 600 watts
• 14,5 kg/32 lbs
• 2.8-16 ohms