Quatech RS-485 - Manual (Page 12)

11
6 6
BT RS232 Config Tool Installation & Setup
When setting up this Bluetooth adapter for the first time, you have to install and
run “BT1.exe” as “BT RS232 config tool” first in your computer device. The utility
CD is enclosed in the device box. Before you use this Bluetooth adapter, you
have to pair it with another unit of this Bluetooth adapter device.
All these Bluetooth to RS-232&RS422/485 adapters must be configured first
before you use it. The purpose of configuration is to pair two units of this Bluetooth
adapter device for an exclusive connection between them, and pairing is done by
utilizing Bluetooth address and PIN code
Tool Installation
When setting up this Bluetooth adapter for the first time, you have to install
the utility software of “BT RS232 config tool” in your computer first which is
an executable program in Windows 32 bit environments. BT RS232 config
tool is used to detect and setup the installed.