Quantum Data 802 - Manual (Page 7)

Model 802 Series Quick Start Guide • 7 •
Power-up Modes
Digital Friendly Mode
This operating mode causes the
generator to override a given format's
analog video output type selection
and output digital video. This mode is
activated by holding down the indi-
cated buttons on power up.
Image Outputs
STEP R G B ACS DCS DSS ON
V ideo Gate Sync Gate
This mode will be retained when the
unit is turned off and can only be
deactivated by Removing all modes,
Initializing with factory defaults, or
selecting Analog Friendly mode.
Digital Friendly mode only affects
formats loaded using the front panel
Format knob. Formats loaded using
commands via the communications
ports or as part of a Test Sequence
are not affected.
You can still use the Toggle Analog/
Digital function to temporarily switch
a format's video type to analog when
needed.
CAUTION!
Enabling Digital Friendly mode on a
generator without a digital video
option installed will turn off all out-
puts and report Error 2741 (Digital
video type not supported) for every
format loaded with the front panel
knob.
Analog Friendly Mode
This operating mode causes the
generator to override a given format's
digital video output type selection
and output analog video. This mode
is activated by holding down the
indicated buttons on power up.
Image Outputs
STEP R G B ACS DCS DSS ON
V ideo Gate Sync Gate
This mode will be retained when the
unit is turned off and can only be
deactivated by Removing all modes,
Initializing with factory defaults, or
selecting Digital Friendly mode.
Analog Friendly mode only affects
formats loaded using the front panel
Format knob. Formats loaded using
commands via the communications
ports or as part of a Test Sequence
are not affected.
You can still use the Toggle Analog/
Digital function to temporarily switch
a format's video type to digital when
needed.
CAUTION!
Enabling Analog Friendly mode on a
generator that does not have analog
video hardware installed will turn off
all outputs and report Error 2748
(Analog video type not supported) for
every format loaded with the front
panel knob.