Quantum Dynamic Dolphin Remote - Manual (Page 7)

Dolphin Basic Operation Instructions 7
ACTUATOR CONTROL
The Dolphin can support the control of up to five actuators if a correctly
configured actuator control module is present.
NOTE: Once an actuator is selected, driving will be inhibited until the
actuator is deselected.
1. Press the Actuator Switch representing the seat function needing
adjustment. See figure 2.
2. Push the joystick full forward or full reverse to adjust the actuator. A
forward command with the joystick will extend the actuator; a reverse
command will retract the actuator.
NOTE: When using the Dolphin in conjunction with a TRx Seating System,
give a reverse command to extend the actuator, release the joystick, then
give another reverse command to retract the actuator. The reverse command
toggles between extend and retract only for TRx units.
3. Press the Actuator Switch again to deselect the actuator and resume normal
operation.
Figure 2. Actuator Control Selection