QVS AS-154P - Manual (Page 4)

1
Installation
Installation (For l-To-4 Mode)
AS-154P
Select desired operation by DIP switch (SWl, SW2 is
on) and slide switch.
Turn off all printers and PC.
To connect PC to AS-154P use DB-25 male-to-male
cable.
To connect AS-154P to printers, use 25pin-to-36-pin
male-to-male cables.
Turn on all printers and PC, and AS-154P is ready.
(1 TO
Fig. B I-IN-4-OUT configuration