Quantum TC2201 - Manual (Page 104)

Perform Configuration
Quantum TC2201 User’s Guide 84
• Select 3 to change the default map value for a Portal Group. This
option enables selecting between auto-assigned or indexed
mapping for the iSCSI port(s).
Parallel SCSI
Configuration
3
This menu allows for setting up SCSI attributes.
Table 18 Parallel
SCSI Configuration
Menu
Press the
Enter
key to toggle the current menu to the next SCSI bus.
• Select 1 to edit the SCSI Initiator menu settings, described later in the
chapter.
• Select 2 to enable/disable SCSI Discovery.
Parallel SCSI Configuration Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
Current SCSI Configuration - Bus 0
Initiator ID : 07
Discovery : Enabled
Bus Reset on Boot : Enabled
Discovery delay time : 2 seconds
1) Edit Initiator Settings
2) Enable/Disable SCSI Discovery
3) Enable/Disable SCSI Reset on Boot
4) Set Discovery Delay Time
5) Edit SCSI Target Override Settings
X) Return to previous menu
Command, <enter> for next SCSI bus >