QSC Audio AD-S52T - Manual (Page 9)

9
Specifications- AD-S282H and I-282H with Recommended Signal Processing
Low Frequency Drivers (parallel) High Frequency Driver
Frequency Range: 70- 2.1k Hz (-6 dB, free field response) 2.1k- 24.0k Hz (-6 dB, free field response)
60- 2.7k Hz (-10 dB, free field response) 1.9k- 24.0k Hz (-10 dB, free field response)
Power Rating: 400W (8 hrs., IEC268-5, 50- 2.0k Hz, 6dB crest factor) 50W ( 8 hrs., IEC268-5, 1.0k- 20.0k Hz, 6dB crest factor)
Recommended Amp Power: 800W 100W
Nominal Coverage: 90° horizontal x 60° vertical with waveguide as installed at factory
Physical Specifications
Weight: I-282H: 28.5 lb. net, 36.8 lb. shipping (12.9 kg., 16.7 kg.)
AD-S282H: 27.7 lb. net, 35.6 lb. shipping (12.6 kg., 16.1 kg.)
AD-S282HT: 32.9 lb. net, 40.8 lb. shipping (14.9 kg., 18.5 kg.)
Enclosure and Grill: painted high impact polystyrene, removable aluminum grill
Controls AD-S282HT: rotary tap selector switch
AD-S282H and I-282H: Active / Passive mode selector rotary switch
Connectors: I-282H- 2 NL4 Speakons wired in parallel
AD-S282H- barrier strip screw terminals, 1 set used for passive, 2 sets used for bi-amp
AD-S282HT- barrier strip screw terminals, 2 sets wired in parallel
Mounting Hardware: All models- yoke mount with retaining knobs
I-282H- includes swivel outrigger feet, retaining knobs, and rubber feet, integral pole cup accepts
1.375” or 1.500” (35 mm or 38 mm) pole diameters
AD-S282H and AD-S282HT: includes socket head screws and washers for enhanced security
Specifications are subject to change without notice.