QVC TCE5850R - Manual (Page 3)

Getting To Know Your Convertible Hand/Stand Mixer
Technical Specifications
Voltage: 127V., 60Hz.
Power: 325Watts
Bowl Capacity: 3.5 Qts.
* Illustrations may differ from actual product
2
1. Hi-Lo Speed Selector
2. Speed Control
3. Burst of Speed Button
4. Beater Eject Button
5. Beaters
6. Stainless Steel Bowl
7. Tilt Button
8. Hand Mixer Release Button
9. Bowl Speed Control Dial
10. Hand Mixer
11. Base Stand
12. Dough Hooks
13. Plastic Bowl
14. Bowl Lid
15. Spatula
12
14
13
15
Operating Instructions
1. Place the base of the mixing bowl
onto the turntable of the stand. To
fully lock the mixing bowl in place,
press down and turn the mixing bowl
in a clockwise direction until you hear
it click into place. (Fig. 9)
Fitting the Bowl onto the
Turntable of the Stand
WARNING: To avoid injury when
assembling the hand mixer to the
stand, always set the speed selector on
“0” and unplug the appliance.
1. Before plugging the hand/stand mixer
into the electrical outlet, assemble the
unit with the desired accessories.
2. Set the speed selector switch to the
“HI” or “LO” position.
3. Select the speed that you desire.
Fig. 9
2. To remove the mixing bowl from the
stand, press down and turn the mixing
bowl counter clockwise. The mixing
bowl can now be detached from the
turntable and lifted away. (Fig. 10)
Fig. 10
Note
5
: It is easier to fit the mixing bowl to
the turntable when the hand mixer is not
attached to the pivot support.
Using the Convertible Hand/Stand
Mixer
WARNING: To avoid injury when
assembling the hand mixer to the
stand, always set the speed selector on
“0” and unplug the appliance.
MIXING GUIDE
MIXING
TASK
RECOMMENDED
SPEED(S)
Folding &
Blending
“LO” 1 & 2
Light Mixing “LO” 3 & 4
Creaming &
Beating
“HI” 6 - 8 or “LO” 5
Whipping &
Aerating
“HI” 9 & 10 or
BURST
4. Select the bowl speed – “LO” or “HI”
depending on how fast you want the
bowl to turn. Use the “LO” bowl
speed for mixing speed 1-5. Use the
“HI” bowl speed for mixing speed
6-10. If you do not wish the bowl to
turn, leave the bowl speed in the
“OFF” position.
NOTE:
•
Always select the speed setting
before the mixing bowl speed to
prevent ingredients from being flicked
out of the mixing bowl.
• Always start mixing at slow speeds
and increase the speed gradually to
prevent the ingredients splashing out
of the bowl.