Quantum 890 USE 155 - Manual (Page 28)

Installing the Bridge Hardware
28
2.8
Connecting the Ethernet Cable
Figure 12 shows the RJ45 port connection for the 10baseT Ethernet cable.
Figure 12 Connecting the Ethernet Cable
Ethernet Port (RJ45)
Warning
COMMUNICATION DISRUPTION HAZARD Connecting any device to an active
Ethernet network can disrupt communication on the network. Before you
connect the Bridge to your network, and before you apply power to the Bridge,
heed the steps in Chapter 3 for configuring the Bridge in your application.
Failure to observe this precaution can result in injury or equipment damage.