Using the tape drive – Quantum Internal Storage System Travan 40 GB User Manual
Page 16
Installing the Drive
Using The Tape Drive
12
Quantum Travan 40 GB Internal Storage System
7
Check all cables in your computer system
Make sure that no cables have loosened during the installation. Make
sure that all cables are routed so that they will not bind or become
crimped when you replace the cover of your computer.
8
Reinstall your computer cover
Your new tape drive is ready for use. However, you may need to
install drivers for your operating system, as described in step 9.
9
Install drivers (Windows systems only)
The first time you restart your computer after installing the Travan 40
tape drive, the Windows operating system will try to identify the
drive. To complete this process, you need to install the Windows tape
drivers supplied on your Quantum Tape Resource CD.
Windows systems include a driver installation wizard, which will
step you through the process. When asked to locate the drivers, insert
your Quantum Tape Resource CD into your CD-ROM drive and
select to have the wizard find the drivers automatically on the CD.
Using The Tape Drive
2
For instructions on using and maintaining your Travan 40 tape drive and
. For instructions on using your backup software,
see the online manual that came with your software.