QSC Audio WL2102-w - Manual (Page 10)

10
Stacking the Stacking Frame
The Stacking Frame comes with two aluminum I-bars used for aligning and securing the frame to QSC’s 215SB or 215PCM subwoofer.
To use the I-bars, simply slide each one into the small frame’s L-track and secure with a stud fitting. Then, turn the frame over (I-bars on the
bottom) and slide the exposed I-bars into the subwoofer’s L-track. Secure the I-bar with a stud fitting. Note that the stud fittings used are
not required to be load rated as they only retain the I-bars from moving laterally.
Care
We suggest wiping down all screws, pins, hardware, and frames with LPS ® Dry Film Lube or Starrett M1 ® All Purpose Lube before and
after outside gigs to help prevent oxidation. This will not only prevent the formation of rust and other oxides, but also provide lubrication,
adding to the longevity and ease-of-use of the WideLine product.
When stacking a Stacking Frame on top of QSC’s
215SB or PCM cabinet, use the I-beam inserts (1
in each L-track) to assure proper alignment and to
firmly secure the frame to the 215 cabinet. Secure
using stud fittings.
Do not stack more than four (4) enclosures on a
Stacking Frame.
I-beam stacking bar: slide
into L-track on Stacking
Frame, then align and slide
into L-track on subwoofer
cabinet.
QSC 215PCM or
215SB subwoofer