QSC Audio 122 - Manual (Page 2)

Installation Options
The yoke bracket can be used to support the HPR 122i in several ways.
Yoke above loudspeaker enclosure (Figure 3) - If using the yoke
bracket positioned above the enclosure, attach to the enclosure using the outer-
most set of mounting holes in the bracket’s arms.
If single point bracket attachment to the support structure is
used, ensure the support hole just right of the loudspeaker‘s
centerline is used in order to keep the enclosure’s weight bal-
anced.
Yoke below loudspeaker enclosure (Figure 4) - If using the yoke
bracket positioned below the enclosure, attach the yoke to the enclosure using
either set of mounting holes in the bracket’s arms.
Yoke behind loudspeaker enclosure (Figure 5) - If using the
yoke bracket positioned behind the enclosure, use the innermost set of mount-
ing holes in the bracket’s arms. Do not use the outermost set of holes!
If the yoke bracket is behind the loudspeaker, the inner set of
mounting holes (on the brackets arms) must be used.
Third party loudspeaker pole stand mount (Figure 6) - The
yoke bracket may be attached to a third party loudspeaker pole stand mount.
This allows the user to mount the HPR 122i on a 35mm loudspeaker pole and be
adjusted for up- or down-tilt, as required. The bracket’s mounting hole pattern
fits most available mounts. For a list of compatible pole mounts, please visit
http://www.qscaudio.com.
When attaching the pole mount, use the pole mount holes that
result in the center of the pole being offset to the right of the
loudspeaker’s centerline (as viewed from the front of the
enclosure).
Do nothing- Keep in mind, if you do not know what you are doing, don’t
mount this loudspeaker to anything, including the yoke bracket. Consult profes-
sional assistance if unsure about any loudspeaker mounting or suspension topic
or procedure.
Figure 3- Yoke
above enclosure.
Figure 4- Yoke
below enclosure.
Figure 5- Yoke
behind enclosure.
Note! Use inner set
of mounting holes
for attaching
enclosure to
bracket arms.
Figure 6- Yoke mounted
on third-party loud-
speaker pole mount.
Note! Use the pole
mount holes (shown) to
the right of the loud-
speaker’s centerline as
viewed from the front of
the enclosure. This will
better balance the loud-
speaker over the pole.
Warranty
(USA only; other countries, see your dealer or distributor)
Disclaimer
QSC Audio Products, Inc. is not liable for any damage to amplifiers, or any other equip-
ment that is caused by negligence or improper installation and/or use of this loud-
speaker product.
QSC Audio Products 3 Year Limited Warranty
QSC Audio Products, Inc. (“QSC”) guarantees its products to be free from defective
material and / or workmanship for a period of three (3) years from date of sale, and will
replace defective parts and repair malfunctioning products under this warranty when
the defect occurs under normal installation and use - provided the unit is returned to our
factory or one of our authorized service stations via pre-paid transportation with a copy
of proof of purchase (i.e., sales receipt). This warranty provides that the examination of
the return product must indicate, in our judgment, a manufacturing defect. This war-
ranty does not extend to any product which has been subjected to misuse, neglect, acci-
dent, improper installation, or where the date code has been removed or defaced. QSC
shall not be liable for incidental and/or consequential damages. This warranty gives you
specific legal rights. This limited warranty is freely transferable during the term of the
warranty period.
Customer may have additional rights, which vary from state to state.
In the event that this product was manufactured for export and sale outside of the
United States or its territories, then this limited warranty shall not apply. Removal of the
serial number on this product, or purchase of this product from an unauthorized dealer,
will void this limited warranty. Periodically, this warranty is updated. To obtain the most
recent version of QSC’s warranty statement, please visit www.qscaudio.com. Contact
us at 800-854-4079 or visit our website at www.qscaudio.com.
Single point
attachment
hole.