Quantum Instruments QFX5d-R - Manual (Page 30)

26
14.4.2 Set up the Remote Qflash Groups
Any number of Remote Qflashes may be used. Set each the Mode of each
Remote to either Wireless Group R1 or R2, or Linked to Local, using the
Mode I and Up J/ Down L controls on each Remote Qflash.
The displays on the
Remote Qflashes will
update when the word
SEND appears on the
Local Qflash.
14.4.3 Wireless Control Mode – Important Notes
• Qflash cannot fire while sending data to wireless Remotes, or when the
display is blinking. To speed up data transmission, press Set G on the
Control Qflash until SEND appears in the display to make Qflashes
ready.
• When using a QTTL adapter, the camera settings for f/# and ISO will
appear on the Control Qflash display. Generally, to update the camera
settings, press the camera shutter 1/2 way (to wake up the camera or
metering function). The Qflash display will then update to the current
camera settings. (On some cameras updating takes place automatically).
QFT5D INSTRUCTIONS 10/5/06 10:27 AM Page 30