Will – Quicksilver M60 User Manual

Page 2

Advertising
background image

2 AMP SLO-BLO FUSE

Standard fuse value must not be exceeded. If a fuse blows, replace and turn amp back on. Visually
inspect all 4 output tubes to see if they are all glowing at the same brightness. If one tube is not
glowing or is glowing red, that tube is bad. If the output tubes appear to be okay, then the cause
of the fuse blowing may be due to poor system grounding, unstable preamp, shorted speaker, etc.
Interchanging the amps between channels will help localize the problem to either the system or the
amplifier.

TUBES

The input tubes in this amplifier were chosen for their specific performance characteristics. These
tubes should last several years or many thousands of hours. We can only guarantee the
performance of this unit when used with input tubes supplied by Quicksilver.

Each M60 Amplifier is shipped with 4 matched EL34 output tubes. Best performance will result
when all 4 tubes are A.C. and D.C. matched. The number on each EL34 box is the D.C. matching
number for that tube.

Output tubes

will

need to be replaced periodically. When a degradation in sound occurs or the

fuse blows repeatedly, it is time for new output tubes. We recommend purchasing tubes from
Quicksilver Audio or your dealer and we recommend keeping an extra output tube on hand in the
event that one fails.

OUTPUT TUBE BIAS

There are no bias adjustments in the M60. Whichever output tubes are used will all automatically
adjust themselves to the necessary bias. Because of this many different output tubes may be used.
The best performance and longest life will result when all 4 output tubes are matched.

Some of the output tubes that may be used in the M60 are: EL34, KT77, 6L6, 5881, 6550, KT88,
KT99A.

The measured performance and the sound of the amplifiers will be slightly different with each type
of output tubes used. In some cases the customer may want to change output tubes to finetune
the amplifier to his system.

8

2

AMP

FUSE

EL34

EL34

EL34

EL34

12AX7

12BH7

OR

12AU7

C

1

POWER

SWITCH

Push up

to turn on.

POWER SUPPLY

CAPACITORS

4

POWER

TRANSFORMER

IEC

OUTLET

SPEAKER

TERMINALS

INPUT

CONNECTOR

100K

OUTPUT

TRANSFORMER

Advertising