Globalstar GIK-1700 - Manual (Page 21)

17
Operation
Using the phone in a vehicle
Attaching the phone to the Globalstar
Installation Kit
1. Remove GIK connector cover label from back of phone.
2. Remove rubber plug from connector at bottom of phone. Rotate
rubber plug toward antenna.
3. Insert the connector on the bottom of the GIK into the
connector on the phone.
4. Push the phone down and back until it locks into place. You
should hear a click.
5. To remove the phone, press the release button at the top of the
GIK, and gently remove the phone.
6. Replace the rubber plug in the connector.
Remove
This
Sticker
80-C6303-1.book Page 17 Tuesday, June 13, 2006 1:13 PM