Quatech Perfomance Line SPPXP-100 - Manual (Page 11)

Quatech ExpressCard Parallel Port Adapter User’s Manual Installing the software
Installing under Windows Vista
Follow these steps to install the adapter under Windows Vista.
Step Procedure Description
‰
Step 1 Turn on the power to your computer
system. This is the system in which the device is to
be installed.
‰
Step 2 Plug the ExpressCard into an available
ExpressCard slot on the computer.
Windows tells you that it has found new
hardware and launches the Found New
Hardware Wizard.
Figure 7 - Windows Vista "Found new hardware" prompt
Figure 7 illustrates the
Windows Vista Found new
hardware prompt. The Found
New Hardware Wizard
launches automatically when
you first plug in the Parallel
Port Adapter.
Figure 8 - "Windows needs your permission to use this program" prompt
Rev 1.00 (July 2007) Page 7