Quick Eagle Networks 18 Volt Cordless Hammer Drill 68851 - Manual (Page 7)

Page 7 For technical questions, please call 1-800-444-3353. Item 68851
Specifications
Charger
120V~, 60Hz Input
7.2-24VDC Output
1 Hour Charge Time
( SKu 68859, included)
Battery Type
18V, 1500mAh, NiCd
( SKu 68860, included)
Motor Speed 0-400/0-1200 RPM (variable speed)
BPM (Blows
Per Minute)
0-5200 / 0-15600
Max. Torque 225 in-lb
Chuck 1/2 IN., Keyless
Settings
23 Torque Settings
1 Drill Setting
1 Hammer Drill Setting
Setup - Before use:
note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 11.
Functions
Work Light
Direction
Switch
Battery Switch
Speed
Selector (16)
Torque Setting
Ring (4)
Trigger (12)
Battery
Pack (11)
Chuck (2)
Bit
Groove
Secondary
Handle (20)
Charger indicator led’s
Green led: Continuously lit indicates
charger is powered.
Red led: Flashing indicates that the battery is charging.
Continuously lit (not flashing) indicates
that the battery has finished charging and
should be removed from the charger.
Battery
pack
Red
led
Green
led
Charger
Sa
Fet
Y
o
pe
R
ation
m
aintenan
C
e
Setup