Fuel level indicator, Pto / blade engage knob, Parking brake/cruise control lever – Troy-Bilt TB2450 User Manual

Page 14

Advertising
background image

Fuel Level Indicator

The Fuel Level Indicator is located on the left side of the

tractor’s dash and indicates the amount of fuel in the gas

tank.

PTO / Blade Engage Knob

Activating the PTO engages power to

the cutting deck or other (separately

available) attachments. Pull outward

on the PTO/Blade Engage knob to

activate it. Push the PTO/ Blade Engage

knob inward to disengage the power

to the cutting deck or other (separately

available) attachments.
NOTE: The PTO/Blade Engage knob

must be in the disengaged (OFF)

position when starting the engine.

100%

50%

0%

Parking Brake/Cruise Control Lever

Located in the center of the tractor’s dash

panel below the steering wheel, the Parking

Brake/Cruise Control lever is used to engage

the parking brake and the cruise control Refer

to the Operation section of this manual for

detailed instructions regarding the parking

brake.
NOTE: The parking brake must be set if the

operator leaves the seat with the engine

running or the engine will automatically shut

off.
NOTE: Cruise control can NOT be engaged

at the tractor’s fastest ground speed. If the

operator should attempt to do so, the tractor

will automatically decelerate to the fastest

optimal mowing ground speed.

WARNING!

Never leave a running machine

unattended. Always disengage PTO, set parking

brake, stop engine and remove key to prevent

unintended starting.

14

s

ectiOn

4— c

OntrOls

and

f

eatures

Advertising