TOA Electronics H-3WP - Manual (Page 8)

8
Step 2-4. Insert the detachable input connector into the speaker socket.
Detachable input connector
Lock tab Speaker
Base frame
Rotate both the left and right lock tabs
in the direction indicated by the arrow.
The state that the speaker is
clamped to the base frame
Base frame
Lock tab
Locking screws
(2 places, left and right)
Step 3. Speaker and grille mounting
Step 3-1. Rotate the two speaker lock tabs away from their locking position on the edge of speaker.
Step 3-2. After aligning the speaker with the base frame, rotate the two lock tabs back into position to clamp
the speaker to the base frame. (Temporary fixing state)
Note
When mounting the speaker, take care not to damage the diaphragms of both the woofers and
tweeter.
Step 3-3. Position the speaker and tighten the two locking screws.