Toshiba BDX2500KU - Manual (Page 15)

15
Connections
Notes:
This unit is compatible with TOSHIBA’s Wireless LAN Adapter only. •
Model name: WLM-10UB1
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of
•
the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance,
•
obstacle, interference by other radio devices, etc.).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
•
When applying the security key for the AP (wireless IP sharer), only the following is supported. •
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
Wireless Network Connection
(Need the opTIoNAl Wi-Fi unit of sold separately)
Your Blu-ray disc player can also be connected to network with a Wireless access point.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the
USB port on the rear panel of the Blu-ray Disc Player, and set the wireless network options (See Step 2 ~ 3).
2. After the Wi-Fi device inserts to USB terminal, press / to select “ Network” from Settings, and press OK to enter.
3. Press / to select “ Wireless”, and press OK to enter.
(For detailed information, please refer to the user guide for WLM-10UB1.)
AC IN
lAN USB HDMI OUT R l
Y P B P R SBl C Sl Fl
SBR SW SR FR
MUlTI CHANNEl AUDIO OUTPUT BITSTREAM / PCM OPTICAl AUDIO OUT VIDEO OUT
COMPONENT VIDEO OUT
Wireless access point
Modem Cable
Modem Port
USB
Wireless LAN
Adapter
Wired
Network Test
Wireless