Loading and unloading a video cassette – Toshiba MV13P3 User Manual

Page 35

Advertising
background image

33

2

EJECT

Push the center of the tape until it is automatically retracted into the TV/VCR.

AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically
and playback will start immediately.

Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.

LOADING AND UNLOADING A VIDEO CASSETTE

UNLOADING

Pull the cassette out.

1

LOADING

AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically (See NOTE on page 40).

NOTES:

Always eject the tape when not in use.

The cassette tape can be ejected even if the POWER is “OFF”.

OR

To unload a video cassette, press EJECT on
the remote control, or press STOP/EJECT on
the TV/VCR twice. The first press will stop the

tape in any mode. The second press will eject the
tape.

Use only video cassette tapes marked

.

2

1

STOP/EJECT

5L80301C P20-33

20/4/04, 16:28

33

Advertising