Toshiba DVD Video Player/Video Cassette Recorder SD-V296KU - Manual (Page 21)

DVD Functions
Information
Español
Precautions
Setup
VCR Functions
EN – 21 –
1 Press [MODE] once in stop mode.
2 Using [K / L] to select desired track.
Press [ENTER].
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program,
use [SKIP H / G] to see all the tracks.
• While a JPEG folder is open:
– Press [ B] when you want to go to the next hierarchy.
– Press [s ] when you want to go back to the previous hierarchy
(except for the top hierarchy).
3 Press [PLAY B] to start programmed playback.
1 Press [MODE] twice in stop mode.
2 Press [PLAY B] to start random playback.
1 Press [A-B] at your desired starting point (A).
2 Press [A-B] at your desired ending point (B).
• Point B should be in the same title or track as point A.
1 Press [REPEAT] to select the desired option to repeat during
playback.
Repeat / Random / Programmed Playback
A-
A-B
CD-DA TOTAL 0:00:00
CD-DA TOTAL 1:03:30
2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
Note:
• Repeat setting (except “ALL”) will be cleared when moving to another
title, chapter or track.
• This function may not be available with some discs or during repeat A-B
playback.
Note:
• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered
track.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and press
[ENTER] at step 2.
• While a program is being played back, [STOP C] works as follows;
- Press [STOP C] and [PLAY B] next, so that the programmed
playback restarts. (CD playback restarts from the current point.)
- Press [STOP C] twice and [PLAY B] next, so that playback restarts
from the first track in the original order. However, your programmed
playback can be restarted when you follow the above steps. (Your
programs are still stored until either the disc tray is open or power is
turned off.)
• To repeat the current track in the program, press [REPEAT] repeatedly
until “ TRACK’’ appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until
“ ALL’’ appears during playback.
Note:
• To repeat the current track in the random mode, press
[REPEAT] repeatedly until “ TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly until
“ ALL” appears during playback.
• During random playback, you cannot go back to the previous track.
A-B
PLAY
Note:
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function is not available in the other repeat modes.
• The A-B Repeat section can only be set within the current title for DVDs,
or current track for Audio CDs.
PLAY
REPEAT
PLAY
Repeat Playback
DV DVD
Repeat function is available only during playback.
Programmed Playback
DV DVD
You may determine the order in which tracks will play back.
Random Playback
DV DVD
This function shuffles the playing order of tracks instead of
playback in sequence.
Repeat A-B Playback
DV DVD
Repeat function is available only during playback.
Each time you press [REPEAT], repeat function changes as exam-
ple below.
OFF
CHAPTER
TITLE
(repeat off)
(current chapter repeat)
(current title repeat)
OFF
TRACK
ALL
(repeat off)
(current track repeat)
(entire disc repeat)
e.g.) DVD
A-B
PLAY
MODE
STOP
MODE
STOP
or
ENTER
OFF
TRACK
GROUP
ALL
(repeat off)
(current track repeat)
(current group repeat)
(entire disc repeat)
e.g.) CD
e.g.) CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
E8EB5UD_SD-V296KU_EN_ES_v1.indd 21 E8EB5UD_SD-V296KU_EN_ES_v1.indd 21 2008/07/14 10:38:01 2008/07/14 10:38:01