11 display mask – Toshiba SATELLITE A200 User Manual
Page 151
Advertising
4 Replacement Procedures
Minnesota 10M/10MG Series Maintenance Manual
4-33
4.11 Display Mask
Removing the Display Mask
To remove the display mask, first remove the display assembly as described earlier, and then
follow the steps below:
1.
Remove four rubber pads to reveal the four M2.5x6 screws securing the display mask to
the LCD module.
Figure 4-35
Removing the rubber pads
2.
Remove the four M2.5x6 black screws securing the display mask.
Figure 4-36
Removing the display mask screws
Advertising