Tripp Lite 2POSTRMKITWM - Manual (Page 5)

5
Quick Installation
Plug the UPS into an outlet on a
dedicated circuit.*
NOTE! after you plug the UPS into a live AC outlet,
the UPS (in “Standby” mode) will automatically
charge its batteries,** but will not supply power to
its outlets until it is turned ON (see Step 3 below).
* Select models include an additional plug which can be switched by
a qualified electrician. ** The BATTERY CHARGE LED will be the
only LED illuminated.
Plug your equipment into the UPS.*
* Your UPS is designed to support Media Center PCs, home automa-
tion systems and audio/video components only. You will overload the
UPS if the total VA ratings for all the equipment you connect exceeds the
UPS's Output Capacity. To find your equipment's VA ratings, look on
their nameplates. If the equipment is listed in amps, multiply the num-
ber of amps by 120 to determine VA. (Example: 1 amp × 120 = 120 VA).
If you are unsure if you have overloaded the UPS's outlets, see “OUT-
PUT LOAD LEVEL” LED description.
Turn the UPS ON.
Press and hold the “ON/OFF/STANDBY” button for
one second. The alarm will beep once briefly after one
second has passed. Release the button.
1
2
1
2
3
3
200507083 93-2477 Sinewave SmartPro Rackmount UPS OM.qxd 10/19/2005 10:35 AM Page 5