Toshiba 23HLV85 - Manual (Page 22)

22
(E) 23HLV85
Setting up
y
our T
V
Changing the on-screen display language
You can choose from three different languages (English, Spanish and
French) for the on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, and then press x or • until the Special menu
appears.
2. Press ENTER, and then press y or z to highlight Language.
3. Press ENTER, and then press y or z to select your desired
language.
Language
Caption/Text
Captions
Panel lock
V-Chip
Auto off
English
Español
Français
EXIT MENU
Special
Adding channels to the TV’s memory
When you press CH or CH , your TV will stop only on the
channels you program into the TV’s channel memory.
Follow the steps below and on the next page to program all active
channels into the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the channel memory. After the channels are
programmed automatically, you can manually add or erase individual
channels (see page 23).
To program channels automatically:
1. Press MENU, and then press x or • until the Channel menu
appears.
2. Press ENTER, and then press y or z to highlight Auto
program.
To start
ENTER EXIT MENU
Auto program
Manual program
Favorite channel
Blue screen
Channel
3. Press ENTER to start auto-programming. The TV will
automatically cycle through all the TV and Cable channels, and
store all active channels in the channel memory.
2 % TV 4
ENTER
Auto program
Manual program
Favorite channel
Blue screen
Channel
4. Press CH or CH to view the programmed channels.
Note:
• To tune the TV to a channel not
programmed in the channel memory, you
must use the Channel Number buttons on
the remote control.
• If you press the ENTER button during auto-
programming, the function will stop and
only the channels programmed up to that
time will be stored in the channel memory.
MENU
yzx •
MENU
yzx •
ENTER
ENTER
CH
#01E21-23_23HLV85 05.6.24, 8:15 PM 22
Black