Telex PAM-32 - Manual (Page 21)

19
Service Menu
2. Press ⎠⎠ to select any of the following:
Auto Baud: Senses what the Matrix is running, and sets the PAM accordingly.
9600 Baud
76.8 K Baud
NOTE: Run Service Menu, Save Cfg to store the settings.
Service Menu, DSP Func
This item increases the digital signal processing features.
1. Select DSP Func, then tap PGM.
Filtering displays.
2. Press ⎠⎠ or −− to display any of the following items:
Filtering
Gating
Metering
Mixing
Metering
Metering lets you use the Vol. display as an LED bar graph meter to monitor an audio signal for about 1 minute.
1. Tap PGM.
Microphone displays
2. Press ⎠⎠ or −− to display any of the following items:
Microphone
Matrix
Aux 1
Aux 2
3. Tap PGM.
Meter: Mic displays.
4. Press ⎠⎠ or −− to display any of the following items:
Meter: Mic
Meter: Mtx
Meter: Aux 1
Meter: Aux 2
5. Tap PGM.
The Vol. bar graph is now monitoring the selected audio source.
6. Tap CLR to exit metering or allow the metering function to time-out after about one minute.
Mixing
Mixing lets you route selected audio signals to the intercom system, to the speaker, or to the left or right headphone when
using a headset. By default, the microphone signal is routed to the matrix, and the matrix signal is routed to the speaker and to
the left and right headphones.
1. Tap PGM.
To Matrix displays.
2. Press ⎠⎠ or −− to display any of the following items:
To Matrix
Speaker
Left Hdst
Right Hdst