Technicolor - Thomson CS196 - Manual (Page 13)

Showing Demonstration
Press DEMO/DIMMER to turn on/off
demonstration mode. The demonstration scrolls
through all display operations.
Setting the Clock
1. Press and hold CLOCK on the remote control
until the hour flashes on the display.
2. Press or to set the hour and then
press CLOCK to shift to minute digits.
3. Press or to set the minute.
4. Press CLOCK twice to save and quit settings.
Setting the Timer
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
2. For setting time, press or to set the
hour and then press TIMER to shift to minute
digits.
3. Press or to set the minute.
4. Press TIMER to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press or
to select TUNER / REC TUNER / DISC / USB /
PLAYER.
If TUNER REC is selected, press or
to select the preset station.
6. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
7. Press TIMER to save and quit settings.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
ON
2:00
Settings
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
OFF
0:00
VOL 10
PRE 01
EN
8
CS196 EN 17/2/06 7:28 PM Page 15