Thermador T24IW - Manual (Page 8)

en-us
8
Set the language
The display languages can be changed according
to the table in the chapter Setup mode.
In order to change the display language:
1. Press setup button.
2. Press the ¾ or ¿ setting button, until the set
language is displayed.
3. Press the @ or A setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
Setting the temperature
The temperatures in both climatic zones can be set
independently of each other from +41 °F to +64 °F.
We recommend a setting of 51 °F.
1. Activate setup mode with the selection button ¿.
2. Select the required climatic zone.
3. Set the temperature with the @ (warmer) or A
(cooler) selection buttons.
Special functions
The following special functions can be selected
or displayed:
Setup mode
In Setup mode you can make your personal settings.
Switching on
Press setup button.
The first menu (temperature unit) is displayed
in the fascia.
Making settings
1. Switch on setup mode.
2. Press the selection button ¾ or ¿.
The next menu is displayed and its current setting
(mostly ON or OFF).
3. Press the setting button @ or A.
The setting is stored, if the next menu is selected
using ¾ or ¿.
Switching off
Press setup button.
All of the changed settings are stored.
Note:
If no button is selected within 20 seconds, the setup
mode ends automatically. All of the changed settings
are stored. The set temperature is displayed again
in the fascia.
Menus in the setup mode
The following settings can be made.
Menu Possible setting
Temperature unit °C (degrees Celsius)
°F (degrees Fahrenheit)
Language English
French
Spanish
Sound On
Off