Turbosound RACKDP-50 - Manual (Page 3)

user guide
RACKDP-50
RACKDP-50 user guide v1.0
Page 3
place this in your CD-ROM drive, or alternatively download the drivers from the Turbosound
website.
Windows XP driver installation
Connect a USB cable from your computer to the BvNet interface or USB connector of the
RACKDP-50. The connection brings up the ‘Found New Hardware’ Wizard.
Insert the CD and Click ‘Next’. Once the USB BvNet Device has finished installing you will be
prompted to install the USB BvNet Port. Click ‘Next’.