Tyco Electronics P7100IP - Manual (Page 34)

MM101332V1, Rev. K
3. Press

again to toggle between High and Low power.
4. “POWER = HIGH” or “POWER = LOW” will appear momentarily on the top line of the display.
10.10.2 Using the Pre-Programmed Option Button
Press the Option button. “POWER = HIGH” or “POWER = LOW” will appear momentarily on the top
line of the display.
10.11 MENU
The Menu function accesses features that are not available directly from the keypad. The order and actual
menu items available is configurable through programming. Upon radio power up, the menu item that is
at the top of the menu list will always be displayed first. Subsequent access to the menu function will
return the last menu item that was shown in the display and cursor position.
1. To enter the menu mode, press

.
2. Upon entering the menu selection mode, Menu options will appear in the display (see Figure 10-1).
Figure 10-1: Menu Display
3. The radio will continue to receive and transmit normally while in the menu function.
4. To scroll through the menu options use the

or

keys. When the required menu item has been
found align the cursor with the option then press

to select it. The menu item's parameter setting
shown in the display can now be changed by using

or

to scroll through the list of parameter
values.
5. Once the desired setting is reached press

to store the value and return the menu option selection
level.
For menu items that display radio information, pressing

or

will scroll through a list of
informational displays. The possible menu items are in Table 10-1.
10.11.1 Menu Item Selection Process
An example of the menu item selection process and menu item parameter change is detailed below for the
backlight menu item.
1. Press

.
The menu mode is entered.
2. Press

or

until the display shows:
34