Toshiba MEGF40 - Manual (Page 57)

57
Using the Pr
oduct
Other Helpful Inf
ormation
W
elcome
Getting Read
y
Output of Audio from An Audio System
To LINE OUT jack
PC speakers, etc.
Audio Cable
USB/LINE OUT switch
Commercially available
Stereo mini-plug
Use of the LINE OUT jack of the USB CRADLE permits playback with any analog device.
When changing the USB/LINE OUT switch from USB to LINE OUT, with
USB connected, do so as described below.
Close the gigabeat room, then make the change when the gigabeat is not
connected to the PC.
When using the LINE OUT jack for output, the equalizer is set to FLAT in
spite of its setting and display and the PRESET VOLUME and PRESET EQ
(
p. 63) have no effect.
Connect the gigabeat to the USB CRADLE.
Connect the LINE OUT jack of the USB CRADLE with a
PC speaker or another device.
Set the USB/LINE OUT switch of the USB CRADLE to
“LINE OUT”.
gigabeat F60_OP52_59(E)в¸о 05.4.15, 4:46 PM 57