Toshiba MD24FP1 - Manual (Page 27)

27
TV operation
Sound control adjustment/
Stereo and Second Audio Program (SAP)
Sound controls are factory preset but you can adjust them individually as follows:
The TV/DVD is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs
with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmis-
sion or for other purposes.
To select desired sound
Listening to stereo sound
MONO + SAP BROADCASTING
STEREO SAP CH 013
STEREO CH 013
Press AUDIO to select the desired sound.
SEL. STEREO
When the TV is turned on or a channel selection is
made, make certain the “STEREO” appears on the
screen. This means that Stereo broadcasting is avail-
able. You can enjoy stereo sound from the left and
right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO to change
to mono sound. The noise should be eliminated. Press
it again to return to the stereo sound.
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, make certain the SAP appears on the screen.
This means that the Second Audio Program
broadcasting is available.
MONO SOUND
(MAIN)
SAP SOUND
AUDIO
AUDIO
STEREO+SAP BROADCASTING
STEREO SOUND
(MAIN)
MONO SOUND
(MAIN)
SAP SOUND
CANCEL
/ / /
MENU
AUDIO
Sound control adjustment
Press or to select “AUDIO”, then press
.
1
2
Press MENU, then press or to select
option.
After your desired setting press MENU
repeatedly until the menu screen is cleared. 4
Press or to select the item you want to
adjust, then press or to adjust the setting.
3
3 3 3 3 3 To return BASS/TREBLE/BALANCE control
adjustments to the factory preset levels
Press CANCEL while making sound adjustments.
VOL – VOL +
SETUP/MENU
PICTURE
AUDIO
PICTURE PREFERENCE
CH +
CH –
VOL + PICTURE
AUDIO
PICTURE PREFERENCE
CH +
CH –
VOL – VOL +
BASS
TREBLE
BALANCE
SURROUND
STABLE SOUND
0
0
0
OFF
OFF
BASS:
Press
or to adjust the bass sound.
TREBLE:
Press
or to adjust the treble sound.
BALANCE:
Press
or to obtain an equal sound level from
both speakers.
SURROUND:
Press
or to select “ON” or “OFF”.
ON: The dynamic presence and sound created of-
fers a thoroughly enjoyable listening experience.
OFF: Normal sound.
STABLE SOUND :
Press or to select “ON” or “OFF”.
ON: The Stable Sound feature limits the highest
volume level to prevent extreme changes in
volume when the signal source is changed.
OFF: Normal sound.
SETUP/MENU
5M40101A [E] (P24-27) 20/4/04, 16:40 27