Toshiba CZ 19T31 - Manual (Page 13)

13
Set up
Preparation
Basic Operation
Advanced Operation
Reference Selection
MENU TV/VIDEO VOLUME CHANNEL POWER
T S t s
Programming Channel Memory
TV
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL MUTE
CH
CH
VOL VOL
1
4
7
2
5
8
3
6
9
0 ENT 100
POWER
o
REW FF SLOW PAUSE
STOP PLAY REC TV/VCR
TV/VIDEO FAV CH
A
EXIT
s
/
t
CHANNEL
s
/
t
T/S
MENU
CHANNEL t / s
3
Press T or S until the mode that corre-
sponds to your TV signal system is
displayed in purple.
TV
: TV broadcasts signals.
(VHF channels 2 through 13 and UHF
channels 14 through 69)
CABLE : Cable TV signals.
(Cable channels 1 through 125)
TV/CABLE function
1
Press MENU until the Setup menu is
displayed on the screen.
2
Press s or t until “TV/CABLE” is
displayed in purple.
CH PROGRAM function
1
Press MENU until the Setup menu is
displayed on the screen.
2
Press s or t repeatedly until “CH PRO-
GRAM” is displayed in purple.
3
Press T or S to start channel programming.
The TV will automatically cycle through all
the TV or CABLE channels depending on
the mode selected, and store active channels
in the channel memory.
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
[ADD]ERASE
FAVORITE CH
MOVE[s t] SELECT[T S]
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
TV[CABLE]
[ADD]ERASE
FAVORITE CH
MOVE[s t] SELECT[T S]
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
TV[CABLE]
[ADD]ERASE
FAVORITE CH
MOVE[s t] START[T S]
24
CH PROGRAMMING
COMPLETED
4
CH PROGRAM
CABLE
CABLE
4
When channel programming is complete,
you will see the message at the right.
5
Press CHANNEL s or t to make sure the channel programming has
been done properly.
The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL ▲ or ▼ button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
t/s T/S MENU