Toshiba SD-4205 - Manual (Page 22)

23
Connections
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left
front speakers). • Make the following setting.
On-screen display Select: Page
“PCM” “Audio Out Select”
Connecting to an amplifier equipped with 5.1ch audio inputs
5.1ch surround sound
The Dolby Digital and DTS decoder equipped with this DVD video player enables
you to obtain the full benefit of 5.1 channel sound tracks when you connect the
DVD video player to an amplifier equipped with 5.1 channel audio inputs.
• Use DVD video discs encoded via
the Dolby Digital or DTS recording
system.
• Make the following setting.
On-screen display Select: Page
“Analog 6ch” “Audio Out Select”
Recording system
2 channel sound (except DTS) is output in
the Dolby Pro Logic format. To obtain the
original 2 channel sound, select “Analog
2ch.”
D
DTS
MPEG
54
57
54
57
42
Audio cable
Amplifier equipped with
5.1ch audio inputs
To 5.1ch audio
inputs
To 5.1CH SURROUND
AUDIO OUT
AUDIO OUT
VIDEO OUT AUDIO OUT
2CH
Y S VIDEO COAXIAL BITSTREAM/PCM OPTICAL P B P R
L
R
5.1CH SURROUND FRONT SURROUND CENTER
SUBWOOFER
Amplifier equipped with
a digital audio input
Connect either.
To OPTICAL
type digital
audio input
Optical digital cable
75
Ω
coaxial cable
To COAXIAL
type digital
audio input
AUDIO OUT
VIDEO OUT AUDIO OUT
2CH
Y S VIDEO COAXIAL BITSTREAM/PCM OPTICAL P B P R
L
R
5.1CH SURROUND FRONT SURROUND CENTER
SUBWOOFER
To
BITSTREAM
/PCM
AUDIO OUT