Setting the ip telephone headset transmit volume, Viewing ip telephone terminal information – Toshiba STRATA IP5000 User Manual
Page 128
Administrator Programming
Setting the IP Telephone Headset Transmit Volume
110
Strata CIX IP5000-series Telephone UG 05/08
Setting the IP Telephone Headset Transmit
Volume
1. Press
3
+
6
+
9
+
Hold
(simultaneously).
2. Press
#
.
3. Press
Hold
4. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
transmission level (see
).
5. Press FB4 for headset voice output in speakerphone mode (LED On = with, LED
Off = without).
6. Press
Hold
to set the above data.
7. Go off-hook and hang up.
Viewing IP Telephone Terminal Information
1. Press
3
+
6
+
9
+
Hold
(simultaneously).
2. Press
1
, then press
Hold
.
3. Press
FB1
to view IPT firmware version (application and boot versions, read
only).
4. Press
FB2
to view IPT MAC address (read only).
5. Lift the handset off-hook / on-hook to save the settings.
Note
FB03 will display the Regional Code (default 0); FB04 will display the
connecting IPU address.
Table 16
Volume Level Transmitted from Headset Microphone
LEDS
Transmit Level
FB3
FB2
FB1
ON
ON
ON
Level 7 (min.)
ON
ON
OFF
Level 6
ON
OFF
ON
Level 5
ON
OFF
OFF
Level 4
OFF
ON
ON
Level 3 (initial value)
OFF
ON
OFF
Level 2
OFF
OFF
ON
Level 1
OFF
OFF
OFF
Level 0 (max.)