Telstrat WCMICS VSX Series - Manual (Page 16)

16
Controlling What You Hear
Adjusting Volume
Use the remote control to raise or lower the volume of the sound you hear.
Changing the volume affects only the sound you hear at your site.
To adjust the volume:
Press Volume.
Muting the Microphone
You can mute the microphone if you do not want the far site to hear you. For
example, you might mute the microphone if you want to speak to someone
privately.
To mute or un-mute the microphone:
Press Mute on the remote control.
For VSX set-top and component systems that use a Polycom microphone, you
can also mute the call by pressing on the microphone.
Enjoying Stereo Audio in Video Calls
If your video conferencing room is configured to use stereo sound, the left and
right microphone inputs are configured during system setup. It is important that
you do not move the microphones as this may detract from the stereo audio
experience.
Stereo audio is only used in video calls of 256 Kbps or higher.