Tanita 4800 - Manual (Page 3)

ASSEMBLY INSTRUCTIONS
Before Assembly
NOTE: Carefully inspect all cartons for shipping damage
before unpacking. If damage is found, contact your
shipper or Tanita Corporation immediately. Claims must
be filed with the shipper as soon as possible after receipt
of the damaged package.
One carton containing: Scale folded in transport
position and 2 parts boxes
One parts box containing: AC adapter and storage
bracket, C-clamp, four (4) threaded feet, four (4) locknuts,
and sheet of adhesive labels.
Another small box containing: The electronic
control panel box.
IMPORTANT: After assembling the scale, charge the
battery in the control panel box using the procedure
under “Charging the Battery” on page 3. This will restore
any power lost during storage and shipment.
Tools Needed: Adjustable wrench or 5/8" socket or
open-end wrench.
Assembling the Wheelchair Scale
1. With the scale still in the carton, place the carton on
the floor with the wheels facing the floor.
2. Carefully slide the scale out of the carton so that the
scale is resting on its wheels. In this position the scale
is in its TRANSPORT position and can be wheeled
from one location to another.
3. Install the four (4) leveling feet into the threaded holes
located in each corner of the platform underside. Turn
each foot into the threaded hole until 1/4" to 3/8" is
showing. (Fig. 1)
4. On each side bracket at the base of the handlebar
is a silver locking pin with silver pull ring. This locking
pin is used to lock the scale into either its present
TRANSPORT position (Fig. 1), or in the unfolded
WEIGHING position (Fig. 3); the pin uses the second
set of holes in the side bracket.
5. Lay the platform down on its feet (Fig. 2). Pull each
locking pin and swing the handlebar into the upright
WEIGHING position. Lock the handlebar by inserting
the pin into the second (bottom) set of holes.
ZERO
POUNDS
KILOS
ON OFF
Pounds Kilos
www.tanita.com Push “ON” bu tton and wait until zero appears befor e stepping on sc ale
WEIGHT
2
Fig. 1
Fig. 2
Fig. 3
Leveling Foot
63869
Locking Pin
63963
Parts and Accessories
Description Part No.
Battery Transformer 63812
Rechargeable Battery 63648
Display Board w/cable 63663