Teac DR-H300 - Manual (Page 19)

19
ENGLISH
Preset Equalizer
Press the P-EQ button repeatedly to select a preset equalizer.
CLASSIC: A balanced sound; suitable for classical music.
JAZZ: suitable for jazz music.
ROCK: Provides a heavy powerful sound; suitable for rock
music.
POP: Emphasizes vocal tones; suitable for popular music.
FLAT: Equalizer is off.
Insert the headphones plug into the PHONES jack, and adjust
the volume.
CAUTION
Always lower the volume level prior to plugging in your
headphones. TO AVOID DAMAGING YOUR HEARING - Do not
place your headphones on your head until after you have
plugged them in.
< While muting is engaged, “MUTING” blinks on the display.
< If you change the volume during the muting, the muting will
be canceled.
Headphones
Muting
To mute the sound temporarily, press the MUTE button. Press
the MUTE button again to restore the sound.
Dimmer
You can dim the front panel’s display.
Use the DIMMER button to cycle between these settings:
Full brightness, Medium brightness, Minimum brightness
LOUDNESS button
S-BASS (Super Bass) button
Press the S-BASS button to turn the Bass boost function on
or off.
The S-BASS indicator lights when this function is on.
< The S-BASS and the LOUDNESS buttons don’t work together.
This button compensate for the loss of bass at low volumes.
The LOUDNESS indicator lights when this function is on.
Select off when listening at normal levels.